Edge Protection Profile (Metal Inside)
Silicone Rubber Edge Protection profiles come in between 60-70° Shore hardness and in a glossy, talc free finish. Our three stocked profiles all have a metal insert for better clamping capabilities, however similar profiles can be made without metal inside if needed (MOQ might apply). The materials are fully FDA and 1935/2004 compliant and therefore could to use in food applications. Standard colours are blue and black, other options available on request.
From: £50.40 Inc. VAT £42.00 Ex. VAT
Details & Specs
Technical
Property |
Units |
Typical Value |
Test Method |
||||
Side Bulb |
U Section |
Edge Protection |
|||||
Hardness |
Shore A ±5 |
50±5 |
60±5 |
70±5 |
DIN 5 3505 DIN EN ISO868 |
||
Density |
g/cm3 |
1.15 |
1.17 |
1.18 |
DIN 53479 ISO/R 1183 |
||
Tensile Strength |
MPa |
10.5 |
10.4 |
10.7 |
DIN 53504 ISO/DIN 37 |
||
Elongation at Break |
% |
480 |
390 |
400 |
DIN 53504 ISO/DIS 37 |
||
Tear Strength |
N/mm |
20 |
20 |
22 |
ASTM D 624B |
||
Compression Set |
% |
50 |
50 |
40 |
(22hr/175°C) DIN ISO 815 |
||
Dialectic Strength |
KV/mm |
20 |
20 |
20 |
VDE 0303 |
||
Operation Temperature |
°C |
-60°C to +200°C |
-60°C to +200°C |
-60°C to +200°C |
|||
Colour |
Black |
Blue (RAL 5002) |
Blue (RAL 5002) |
||||
Datasheets
Availability and Fabrication Possibility
- continous coil lengths of 50m possible
- FDA and BfR compliant, therefore EU 1935/2004 compliant
- peroxide cured
- Can be cut down to length or joined as rings and frames
- Stainless steel metal insert
